Double Wall Bushings


Used as a bushingDouble Wall Bushings Bearing
Isolator
Vibration Inhibitor
Used as a feed through protector
Double Wall Bushings
Insulator
Noise Damper

Nyltite Double Wall Bushings
Nylon Double Wall Bushings

Double Wall Bushings

Nyltite Double Wall Bushings can be used as a sleeve bushing or feed through protector or liner, as its’ double wall affords a unique advantage of increased abrasion resistance. When used as an isolator or insulator, the double wall allows more forgiveness when attaching to a mating part as clearances may be larger, the nylon will compress to fill voids.






Double Wall Bushing Information





NYLTITE DOUBLE WALL BUSHING FOR #10 SCREW, 1/4” LONG SKIRT, TOTAL LENGTH 1.250

SEE NOTE BELOW CHART FOR NUMBERING CONVENTION

Order Today!

 

PART SCREW NOMINAL ID W OD HD SD FH MAX. SL
NUMBER (-L) SIZE (DEC. INCH) +.004/-.003 +/-.002 +/-.008 (REF) +.012/-.010 (REF) SEE NOTE
                   
DWB-02-XX-XX 2 .086 .088 .012 .112 .125 .136 .022 .375
DWB-03-XX-XX 3 .099 .101 .012 .125 .138 .149 .025 .437
DWB-04-XX-XX 4 .112 .116 .013 .140 .155 .168 .028 .500
DWB-05-XX-XX 5 .125 .129 .014 .159 .175 .185 .031 .500
DWB-06-XX-XX 6 .138 .142 .015 .172 .190 .202 .034 .562
DWB-08-XX-XX 8 .164 .168 .015 .198 .218 .228 .039 .625
DWB-10-XX-XX 10 .190 .194 .017 .228 .250 .262 .045 .750
DWB-12-XX-XX 12 .216 .220 .017 .254 .280 .288 .050 .875
DWB-14-XX-XX 1/4 .250 .252 .020 .292 .320 .332 .058 1.000
DWB-15-XX-XX 5/16 .313 .316 .020 .356 .390 .396 .071 1.250
DWB-16-XX-XX 3/8 .375 .379 .020 .419 .460 .459 .083 1.500
DWB-17-XX-XX 7/16 .438 .441 .022 .486 .535 .529 .097 1.750
DWB-18-XX-XX 1/2 .500 .504 .022 .548 .600 .592 .109 2.000
DWB-19-XX-XX 5/8 .625 .629 .025 .679 .745 .730 .135 2.500
DWB-20-XX-XX 3/4 .750 .754 .028 .810 .890 .867 .162 3.000
DWB-21-XX-XX 7/8 .875 .890 .032 .954 1.050 .882 .190 3.500
DWB-22-XX-XX 1.0 1.000 1.005 .035 1.075 1.187 1.118 .215 4.000

NOTE: THE FIRST “XX” IDENTIFIER IN THE PART NUMBER CLUSTER INDICATES THE LENGTH OF THE SKIRT (SL) IN 1/16” INCREMENTS UP TO THE MAXIMUM VALUE (MAX SL) SHOWN.
EXAMPLE– FOR A 1/4” SKIRT, .0625 * 4 = .250”. THE MULTIPLIER (04) IS ENTERED AS THIS IDENTIFIER.

THE SECOND SET OF “XX” REPESENTS THE TOTAL LENGTH (TL), AND CAN BE EQUAL TO “SL” OR GREATER UP TO 6” IN 1/8” (.125) INCREMENTS. THIS LENGTH IS ALSO CALCULATED AS ABOVE USING .125 AS THE MULTIPLICAND.
EXAMPLE: FOR A 1 1/4” LENGTH, .125 * 10 = 1.250, (10) IS ENTERED AS THE IDENTIFIER “TL”

Call to Order!

SAMPLES CAN BE PROVIDED UPON REQUEST
CUSTOM SIZES ARE USUALLY READILY AVAILABLE
CALL 1-800-635-5238 FOR MORE INFORMATION OR TO ORDER

Fasteners & Components Home